Tractor in the Use of Safety Rules
General safety rules on the use of tractors are required to comply with the mandatory use of tractors, except as noted below are the other rules (Anonymous, 1998).
1. Tractor only licensed drivers (F) and should be used by trained drivers.
2. And use care before using the tractor necessarily booklet should be read carefully.
3. Roof system protective necessarily to overturn the tractor (DKKC) should be inserted.
All tractors to overturn the protective roof (DKKÇ) should be equipped. Somersault with non-throwing or DKKÇ tractor overturned resulting in the death of almost all are. New and non-cab tractors to almost all of the assembly plant during üreim is mounted DKKÇ system. In our country since 2001 DKKÇ, was required for tractors without cabs. However, the following should be considered here that the operator only some cabin rain, snow and other factors as the purpose of protecting against yapılmaktadır. If you are using a tractor without DKKÇ this is very dangerous and is recommended to wear DKKÇ. A simple design like never DKKÇ However, one can not be retained. Techniques are designed for, is produced and can be installed as the full plarak. Therefore, this type of building standards and is sure you are installing must be investigated.
4. Tractor üzernde the DKKÇ 's, to be effective should not be used in conjunction with safety belts. This structure is upset with the somersault throw or seat belt will hold you safe in the area. There are even running the machines have a closed cabinet is to use the safety belt, the possible potential of an accident prevents you from flying from the window or cabinet.
5. With its own security framework is always attached to the tractor should be used. Security framework, the time to check, make sure cracks and not broken.
6. Noise level during operation of the machine to talk with the power to make agreements. Therefore çalışanlaın partner, it is important to use a standard sign language. At least for emergencies "engine stop", "slow", "remove the equipment," equipment is in "standards such as expression of markers to provide employees the right to learn and they become one unit.
7. Certainly should not be used outside the purpose tractor production.
8. Be given to the owner of the tractor when the tractor and tractor maintenance manual settings according to the principles specified in the maintenance of tractors and timely, and complete all the required settings must be done in a way sure exactly.
9. Tractor working in the clothing should be loose. Known to the moving parts of the tractor been caught. Pulleys and belts, especially on the joints can be dangerous.
10. Tractor drawn equipment of the seat, gripping arrangements, wheels, brakes, control levheleri, dümenleme arrangements should be checked before work and must be secured.
11. The action queues mile field equipment - equipment is running, shaft protection and safety chains should always be inserted. Attention should be attached to the shaft direction. Steps should be used when the tractor in the ride.
Articulated joint shaft also get into the protective enclosure installed under the protection should be taken and then return to the protective enclosure is not attached to the chain sabitlenmelidir, tractor line with the protective enclosure must be attached with a protective tail hair shaft hinged joints at least until the middle is off. Taken when reading devices in use hinged shaft, which hinged on the shaft should be left by the holder on the seat. Thus hinged to the shaft where it contacts the front of the pollution and damage to the switch will have. The picture on the tractor when attached by shaft connected to the tail shaft must pay cover a range of shaft length in general, 1m shaft for at least 10 - 15 cm should be. It should be noted that periodic lubrication of the hinged shaft.
Storage of Protective hinged Shaft Chain (Anonymous, 1998).
Always trying to maintain the machine must be plugged safety. Many people place the machine muhafazasız hand, arm, head and shoulders remain disabled or die by the whip. In the shaft and shaft Muhafazasız machines for safety are the particularly dangerous. 540 minutes in a rotating shaft with a second transfer cycle, and 9 at this time that anything seized may 1.5 m coil. Therefore a special attention to their being protected. The shaft does not yet have a protected, to maintain a proper chain of the absolutely must also be determined.
12. When installing the equipment behind the tractor with the tractor definitely should not be between the equipment.
13. Work to convert the back of the tractor connected devices - from equipment before leaving the place, make sure it is completely downloaded.
14. Clutch action should be given to the tractor by a soft grip. Sudden departures and stiff, especially when uphill or while taking a load can lead to dangerous throw and rear.
15. Tractor to move the bin should be strictly in.
16. When you remove the brake pedal is connected by road to each other must be sure. Otherwise the tractor brake is dangerous as flying.
17. In cases where the equipment needed to attach to the tractor when the tractor got stuck in front or behind the weight or tire can be filled with water.
18. Slowly and be careful when taking a heavy load, the only action taken should be taken hook. If you do not connect the appropriate hydraulic elevator layout, using the mid-strap and pull the lever action should be taken. Otherwise, the tractor's center of gravity back into the corruption and the rear tractor may be approaching.
19. When a device attached to the tractor front loader attached weight to the rear wheels.
20. Gear before leaving the driver's seat should be taken in vain, and the tail pulley to leave the control lever, hand brake must be stopped by the engine. Also if you temporarily leave the tractor at a location even if the ignition key must be taken over.
21. Work under very hot weather when the sun always fill the fuel tank should not be full. Expanding the volume of fuel can sıcakla stones. Should be cleaned every leak occurs immediately be deleted.
22. Tractor fuel can be dangerous. Moving tractor, engine heat, fire or sparks when you have open soon, and never smoke while refueling the (filling - emptying) should not be done. Fire extinguishers should be in a place easily accessible.
23. Hydraulic pipes are not under pressure to unravel before the circuit must be completely sure. Under pressure of an oil leakage can be dangerous. To prevent leakage of serious injuries when a trench, protection goggles and gloves should be used.
24. Without sitting in the driver's seat to run tractors and should not attempt to maneuver.
25. Drivers work with tractors and machinery for the agricultural equipment before starting work on the protective case in a regulated and secure their place and should have a check.
26. Tractor brake settings frequently, should be checked frequently.
27. Tractor, the tractor's power tools and machinery suitable for agriculture should be used.
28. In trying to start the tractor rear drive should take immediately to grasp the press to understand.
29. Tractor with great care must be used more prone land and work in these conditions is being done to the front and rear wheels in accordance with objective weights should be attached.
30. Track width of the tractor is running sideways slant on land must be growing, and operating speed must be reduced to prevent overturn pit, ditch and land roughness must be considered.
31. Engine starter switch before running the tractor-mounted is safer, even with gear and tail of the free arm should be sure.
32. Down a steep slope in the appropriate gear when the engine brake should not be used by any time down the slope by using the clutch and transmission should be removed.
33. Kara is in the way of roadworthiness and traffic rules, traffic signs should be considered to be strictly followed.
34. When the electrical system to work on the tractor's battery negative (-) pole is disassembled.
35. And removing slopes or in the slope, while the tractor is connected to the lower level in the hydraulic equipment to be provided by a good balance.
36. Hydraulic equipment is installed on a tractor while working under should not be raised.
37. While working with the feet on the brake and clutch Tractor tutulmamalıdır.
38. Depressed, stressed and tired intensive case should not be used tractors.
39. 5% bias in places that are on the decline in output and appropriate gear must be used up and should not be done where possible sudden braking.
40. Tractor according to the slope as possible by bringing the situation to be parked, pulled hand brake and down according to the movement direction of inclination to reverse the smallest, the smallest slope upwards forward gear is stuck in park the tractor should be left in case.
41. To avoid flying into and apply the brakes before moving speed should be reduced.
42. Appropriate action should be run at the speed of the tractor purpose. (A level of increased tractor speed accident is likely to increase four times).
43. Agricultural tools and machines are taken of the tractor to connect with a reading taken to the captured equipment and rope chains, etc. for this purpose. equipment should be used.
44. Tractors and machinery for agricultural tools and agricultural tools and machinery to be able to connect easily from the tractor of the queue before taking action, with appropriate control mechanism should be cut off and return downtime is expected.
45. The types of agricultural tools and machines actually taken half with the help of iron taken three points where the sub-link suspension layout of arms delimiters (tie chains) must be as bored.
46. Agricultural tools and machines are connected to the back of the tractor should not be stopped as suddenly.
47. Sitting in the driver's seat of the tractor driver must use the tractor.
48. Tractors in action or captured while agricultural tools and equipment taken over machinery should not be, should not be entered into between the tractor and tractor with the machine or equipment connected to the setting should not be attempted.
49. Tractor fuel leak in the fuel equipment not available to be checked, leaks should be seen as out of work without problems.
50. Tractor working in the fields of honeycomb radiator dust, stalks and straw due to pollution and congestion will be raised for at least once a day should be clear.
51. Tractor is the first grass, stalks, straw, etc.. substances should not be near to hand.
52. Adequate ventilation of exhaust gases out of the tractor are not covered and should not be running the places.
53. Tractors must be made every day is definitely the day care rules. (Surprisingly)
H (Air), A (fuel), Y (oil), R (Radiator), E (electrical equipment), T (Measure)
54. Agricultural tools and machines are connected to the tractor needed for wiring (parking lamp, brake lamp, etc..) Must be running and certainly should be. Otherwise, should not be roadworthy. (Many of our country from the agricultural regions of tractors because of the vast majority of traffic accidents (around 65% 'i) is of this reason.
Harvester in the Use of Safety Rules
In addition to a general rule, the following security measures related to the harvester must be taken (Anonymous, 1998).
1. During use of the harvester, the drive where the field is inclined to limit this limit must be approached from a safe distance. Center of gravity of the harvester within the soil being cut in the plane can lead to dangerous situations.
2. Near the fence and into other places, while, the machine should be taken into account and turning it left to return to normal in addition to the distance at a rate of at least ¼ to leave more distance.
3. Is a great tool reaper back is limited. Therefore, going back and return the machine before the maneuver, make sure there's no one around. Engine must be run before the horn rings.
4. Harvest can occur during the failure to resolve the congestion before you attempt to stop always combine harvester, the ignition key should be.
5. During harvest, wet, muddy or too grassy area is found here should not be harvested, dry, combine harvester to harvest from the fields will not disrupt stabilized should continue.
6. Sap, materials such as straw and dust, reduce the engine's cooling efficiency may then cause a fire must be out of here.
7. Sudden changes in direction and speed of the slope of the harvest should be avoided, even at low speed should not be braking or sharp turn. Because of the high center of gravity in this combine harvester is dangerous. Place a large curve in accordance with the uphill return should be returned. Return of the out of control during dümenleme wheels of the harvester and the shift may be caused to topple.
8. During the harvest, especially in corn fields, it is difficult to see people walking. This is why we always look forward and must be careful.
9. Sudden braking is done to slow down the table above and dangerous behind the rise may ask.
10. Maintenance work and cleaning jobs in the machine should not be done.
11. Time, time bijonları wheel, the screens, jerky and knife should be controlled movement and tight arrangements that must be provided.
12. Time to leave the engine to stop the machine, the hand brake and ignition key should be withdrawn.
13. Refuel without engine should stop and should not be closed while work harvester.
14. Highway is detachable tray, tray will be installed in the carrier should withdraw, because the table is large and heavy and will block traffic and downhill braking the front wheels on the combine harvester may handstand.
Harvester is ready for shipping in the first product we have to empty the store. Carrying case is also brought to the unloading elavatörü. Unit in the back and then cutting out car on agriculture to move in terms of traffic safety has benefits. Combine harvester, the tractor may topple as easily. Therefore be slow in rough terrain.
15. Should be used by the combine harvester drivers responsible, should not be allowed to use someone else's own driver.
16. Reaper in stoppage occurs, blocking, enforcement, etc.. In any case, the transmission automatically cut gripping action, and so must have distinctive layouts.
17. Movement for transmission flat belts, V belts and chains must be controlled tension in her work out.
18. Discharging system is running the grain combine harvester to the grain store for any reason should not be entered.
19. Setup, repair, maintenance and cleaning should be disconnected during the transmission action, if necessary harvester engine must be completely stopped.
20. Combine harvester engine, the radiator, exhaust pipe, muffler, etc.. units accumulated dust, stalks, straw-like deposits on the break should be cleaned every job.
21. The fuel and oil spills on the combine harvester engine should be cleaned immediately.
22. Do not refuel while engine hot.
23. Muffler and exhaust connections for possible fire at least once a day should be checked.
24. To reduce fire hazard, is running hard as the machine next to water and fire extinguishing equipment should be.
One driver in place on the combine harvester, and the other to paddle box on the right side of the back of two fire extinguishing devices at least 15 kg, a digging shovel, and 10 - 15 m2 must be duck.
25. Electrical equipment should be checked on a regular basis, reaper, the cable insulation is damaged and must be repaired or must be replaced.
26. One driver in place on the combine harvester, and the other to paddle box on the right side of the back of at least two 15Kg 'hood fire extinguishing device, a mattock, shovel, and 10 - 15 m2 must be duck.
27. Combine harvester is working in the fields, as a precaution against fire burning soil of a tractor and plow to isolate the process should be ready.
28. In an open area between the hangar or other agricultural tools and machines with the combine harvester in a fire in the park should be removed quickly.
29. Law and related traffic on highways harvester seyrederken should act in line with regulations.
30. To appear in the order to provide navigational; turn, brake and park lights that make night vision of the far right must be strong and be in operation.
31. Convert, braking and parking lamps with an outlet to connect to the carrier table, table lamps carrier must be in the running.
Soil Processing Tools - Machines in the Use of Safety Rules
The use of processing equipment and machinery in the soil next to the general safety rules to follow other safety rules, such as the following can sort
1. Processing tools and machines to work with the soil before you start with the people should be warned.
2. Soil processing machinery and should not be trying to turn sharply.
3. Plow, KÜLTÝVATÖR, disc harrow, etc.. processing machinery in motion, while the captured territory mechanism or instrument, should not be superimposed on the machine, tools and should not be entered into between the tractor, the setting, maintenance and lubrication should not be done.
4. Processing tools and machines are taken soil type and the settings taken arms reading to endanger the driver is too long or too short not to.
5. Automatic removal order and the plow is pulled similar tools and machines used in agriculture to control the use of ropes must be appropriate tension.
6. Processing tools and machinery for soil types are taken, the tractor driver by running the left should not connect to the tractor. Facilities should be able to measure this purpose. Appropriate to assist staff at a height of iron taken of the tractor or a support must be made by using connect.
7. Cover or protection of the milling of the soil falling like tears for reasons to throw stones against the possibility of the movement of milling should be approached with the chops.
8. Single-axle tractor with a run in return for land in milling milling feet must be careful not to hit driver and stop the movement of milling should be back in action.
9. Soil cover in addition to milling hair-pin in the protective security scheme should include.
10. Processing tools and machinery into the soil, or work out before work on security, especially the parts should be checked.
Special Safety Rules Related to October Machines
October machines and road work at the speed of the driver handbook, the action should be run, and other protective housing layouts should be checked
1. Need to withdraw, and is actually connected to the type of tractors and sowing machines must be taken to safety.
2. Seed and fertilizer should be made to fill the job in the fields.
3. Highway traffic signs needed to be attached.
4. Field and growth in the fields during sowing and planting machines sit on helping individuals and seed not moved. Before sowing in the fields, according to the state of the field will be back in place before the beginning of the tractor should not be included.
5. Absolutely must be removed in October machines turn suspended type.
6. And planter seed tube feet often, and congestion that is often raised for control must be resolved.
7. Seed and fertilizer box frequently, often to be checked before filling should be completely discharged.
8. While in the fields planting and sowing machines suspended, remove the tractor hydraulic lever "in swimmer" must be, in the removal process and should not be done at low speed.
9. With sowing machines in the field below Askılı going to be stress spreader arms, sowing machine is fully removed, should be brought to the state of transportation safety lock. During October in the fields next to the rack arm 2 - 4 cm should be given space.
10. Machine in October with more than going to the field should not be going fast and slow, especially suspended machines to bend and kasis be entered.
11. Machine status and size of the field during October according to the 8 - 10 km / h should be used quickly.
12. Going to type in the fields sowing machines suspended hydraulic front arm position selection control 'should be locked and transportation should be used.
13. Move the bottleneck machines in the sowing and planting machines should not be corrected manually while back in October should not be the right move.
14. October machines during filling of the grain and fertilizer warehouse person to work comfortably for the necessary precautions must be taken.
15. October machines fill the tank before connecting to the tractor and tractor after discharge from the tank must be solved.
16. Should not be near to the Officer of sowing machines.
17. Machines to work in October on the passenger seat of the board or must be followed and should not be entered in the tractor with the machine.
18. Bare feet of the machine axes and discs in October should not be cleaned manually. Cleaning should be used during ayıracılar appropriate.
19. Moving parts and check for other security schemes should break each job.
20. October machine settings, cleaning and maintenance work should be done after the tractor has been stopped completely.
General safety rules on the use of tractors are required to comply with the mandatory use of tractors, except as noted below are the other rules (Anonymous, 1998).
1. Tractor only licensed drivers (F) and should be used by trained drivers.
2. And use care before using the tractor necessarily booklet should be read carefully.
3. Roof system protective necessarily to overturn the tractor (DKKC) should be inserted.
All tractors to overturn the protective roof (DKKÇ) should be equipped. Somersault with non-throwing or DKKÇ tractor overturned resulting in the death of almost all are. New and non-cab tractors to almost all of the assembly plant during üreim is mounted DKKÇ system. In our country since 2001 DKKÇ, was required for tractors without cabs. However, the following should be considered here that the operator only some cabin rain, snow and other factors as the purpose of protecting against yapılmaktadır. If you are using a tractor without DKKÇ this is very dangerous and is recommended to wear DKKÇ. A simple design like never DKKÇ However, one can not be retained. Techniques are designed for, is produced and can be installed as the full plarak. Therefore, this type of building standards and is sure you are installing must be investigated.
4. Tractor üzernde the DKKÇ 's, to be effective should not be used in conjunction with safety belts. This structure is upset with the somersault throw or seat belt will hold you safe in the area. There are even running the machines have a closed cabinet is to use the safety belt, the possible potential of an accident prevents you from flying from the window or cabinet.
5. With its own security framework is always attached to the tractor should be used. Security framework, the time to check, make sure cracks and not broken.
6. Noise level during operation of the machine to talk with the power to make agreements. Therefore çalışanlaın partner, it is important to use a standard sign language. At least for emergencies "engine stop", "slow", "remove the equipment," equipment is in "standards such as expression of markers to provide employees the right to learn and they become one unit.
7. Certainly should not be used outside the purpose tractor production.
8. Be given to the owner of the tractor when the tractor and tractor maintenance manual settings according to the principles specified in the maintenance of tractors and timely, and complete all the required settings must be done in a way sure exactly.
9. Tractor working in the clothing should be loose. Known to the moving parts of the tractor been caught. Pulleys and belts, especially on the joints can be dangerous.
10. Tractor drawn equipment of the seat, gripping arrangements, wheels, brakes, control levheleri, dümenleme arrangements should be checked before work and must be secured.
11. The action queues mile field equipment - equipment is running, shaft protection and safety chains should always be inserted. Attention should be attached to the shaft direction. Steps should be used when the tractor in the ride.
Articulated joint shaft also get into the protective enclosure installed under the protection should be taken and then return to the protective enclosure is not attached to the chain sabitlenmelidir, tractor line with the protective enclosure must be attached with a protective tail hair shaft hinged joints at least until the middle is off. Taken when reading devices in use hinged shaft, which hinged on the shaft should be left by the holder on the seat. Thus hinged to the shaft where it contacts the front of the pollution and damage to the switch will have. The picture on the tractor when attached by shaft connected to the tail shaft must pay cover a range of shaft length in general, 1m shaft for at least 10 - 15 cm should be. It should be noted that periodic lubrication of the hinged shaft.
Storage of Protective hinged Shaft Chain (Anonymous, 1998).
Always trying to maintain the machine must be plugged safety. Many people place the machine muhafazasız hand, arm, head and shoulders remain disabled or die by the whip. In the shaft and shaft Muhafazasız machines for safety are the particularly dangerous. 540 minutes in a rotating shaft with a second transfer cycle, and 9 at this time that anything seized may 1.5 m coil. Therefore a special attention to their being protected. The shaft does not yet have a protected, to maintain a proper chain of the absolutely must also be determined.
12. When installing the equipment behind the tractor with the tractor definitely should not be between the equipment.
13. Work to convert the back of the tractor connected devices - from equipment before leaving the place, make sure it is completely downloaded.
14. Clutch action should be given to the tractor by a soft grip. Sudden departures and stiff, especially when uphill or while taking a load can lead to dangerous throw and rear.
15. Tractor to move the bin should be strictly in.
16. When you remove the brake pedal is connected by road to each other must be sure. Otherwise the tractor brake is dangerous as flying.
17. In cases where the equipment needed to attach to the tractor when the tractor got stuck in front or behind the weight or tire can be filled with water.
18. Slowly and be careful when taking a heavy load, the only action taken should be taken hook. If you do not connect the appropriate hydraulic elevator layout, using the mid-strap and pull the lever action should be taken. Otherwise, the tractor's center of gravity back into the corruption and the rear tractor may be approaching.
19. When a device attached to the tractor front loader attached weight to the rear wheels.
20. Gear before leaving the driver's seat should be taken in vain, and the tail pulley to leave the control lever, hand brake must be stopped by the engine. Also if you temporarily leave the tractor at a location even if the ignition key must be taken over.
21. Work under very hot weather when the sun always fill the fuel tank should not be full. Expanding the volume of fuel can sıcakla stones. Should be cleaned every leak occurs immediately be deleted.
22. Tractor fuel can be dangerous. Moving tractor, engine heat, fire or sparks when you have open soon, and never smoke while refueling the (filling - emptying) should not be done. Fire extinguishers should be in a place easily accessible.
23. Hydraulic pipes are not under pressure to unravel before the circuit must be completely sure. Under pressure of an oil leakage can be dangerous. To prevent leakage of serious injuries when a trench, protection goggles and gloves should be used.
24. Without sitting in the driver's seat to run tractors and should not attempt to maneuver.
25. Drivers work with tractors and machinery for the agricultural equipment before starting work on the protective case in a regulated and secure their place and should have a check.
26. Tractor brake settings frequently, should be checked frequently.
27. Tractor, the tractor's power tools and machinery suitable for agriculture should be used.
28. In trying to start the tractor rear drive should take immediately to grasp the press to understand.
29. Tractor with great care must be used more prone land and work in these conditions is being done to the front and rear wheels in accordance with objective weights should be attached.
30. Track width of the tractor is running sideways slant on land must be growing, and operating speed must be reduced to prevent overturn pit, ditch and land roughness must be considered.
31. Engine starter switch before running the tractor-mounted is safer, even with gear and tail of the free arm should be sure.
32. Down a steep slope in the appropriate gear when the engine brake should not be used by any time down the slope by using the clutch and transmission should be removed.
33. Kara is in the way of roadworthiness and traffic rules, traffic signs should be considered to be strictly followed.
34. When the electrical system to work on the tractor's battery negative (-) pole is disassembled.
35. And removing slopes or in the slope, while the tractor is connected to the lower level in the hydraulic equipment to be provided by a good balance.
36. Hydraulic equipment is installed on a tractor while working under should not be raised.
37. While working with the feet on the brake and clutch Tractor tutulmamalıdır.
38. Depressed, stressed and tired intensive case should not be used tractors.
39. 5% bias in places that are on the decline in output and appropriate gear must be used up and should not be done where possible sudden braking.
40. Tractor according to the slope as possible by bringing the situation to be parked, pulled hand brake and down according to the movement direction of inclination to reverse the smallest, the smallest slope upwards forward gear is stuck in park the tractor should be left in case.
41. To avoid flying into and apply the brakes before moving speed should be reduced.
42. Appropriate action should be run at the speed of the tractor purpose. (A level of increased tractor speed accident is likely to increase four times).
43. Agricultural tools and machines are taken of the tractor to connect with a reading taken to the captured equipment and rope chains, etc. for this purpose. equipment should be used.
44. Tractors and machinery for agricultural tools and agricultural tools and machinery to be able to connect easily from the tractor of the queue before taking action, with appropriate control mechanism should be cut off and return downtime is expected.
45. The types of agricultural tools and machines actually taken half with the help of iron taken three points where the sub-link suspension layout of arms delimiters (tie chains) must be as bored.
46. Agricultural tools and machines are connected to the back of the tractor should not be stopped as suddenly.
47. Sitting in the driver's seat of the tractor driver must use the tractor.
48. Tractors in action or captured while agricultural tools and equipment taken over machinery should not be, should not be entered into between the tractor and tractor with the machine or equipment connected to the setting should not be attempted.
49. Tractor fuel leak in the fuel equipment not available to be checked, leaks should be seen as out of work without problems.
50. Tractor working in the fields of honeycomb radiator dust, stalks and straw due to pollution and congestion will be raised for at least once a day should be clear.
51. Tractor is the first grass, stalks, straw, etc.. substances should not be near to hand.
52. Adequate ventilation of exhaust gases out of the tractor are not covered and should not be running the places.
53. Tractors must be made every day is definitely the day care rules. (Surprisingly)
H (Air), A (fuel), Y (oil), R (Radiator), E (electrical equipment), T (Measure)
54. Agricultural tools and machines are connected to the tractor needed for wiring (parking lamp, brake lamp, etc..) Must be running and certainly should be. Otherwise, should not be roadworthy. (Many of our country from the agricultural regions of tractors because of the vast majority of traffic accidents (around 65% 'i) is of this reason.
Harvester in the Use of Safety Rules
In addition to a general rule, the following security measures related to the harvester must be taken (Anonymous, 1998).
1. During use of the harvester, the drive where the field is inclined to limit this limit must be approached from a safe distance. Center of gravity of the harvester within the soil being cut in the plane can lead to dangerous situations.
2. Near the fence and into other places, while, the machine should be taken into account and turning it left to return to normal in addition to the distance at a rate of at least ¼ to leave more distance.
3. Is a great tool reaper back is limited. Therefore, going back and return the machine before the maneuver, make sure there's no one around. Engine must be run before the horn rings.
4. Harvest can occur during the failure to resolve the congestion before you attempt to stop always combine harvester, the ignition key should be.
5. During harvest, wet, muddy or too grassy area is found here should not be harvested, dry, combine harvester to harvest from the fields will not disrupt stabilized should continue.
6. Sap, materials such as straw and dust, reduce the engine's cooling efficiency may then cause a fire must be out of here.
7. Sudden changes in direction and speed of the slope of the harvest should be avoided, even at low speed should not be braking or sharp turn. Because of the high center of gravity in this combine harvester is dangerous. Place a large curve in accordance with the uphill return should be returned. Return of the out of control during dümenleme wheels of the harvester and the shift may be caused to topple.
8. During the harvest, especially in corn fields, it is difficult to see people walking. This is why we always look forward and must be careful.
9. Sudden braking is done to slow down the table above and dangerous behind the rise may ask.
10. Maintenance work and cleaning jobs in the machine should not be done.
11. Time, time bijonları wheel, the screens, jerky and knife should be controlled movement and tight arrangements that must be provided.
12. Time to leave the engine to stop the machine, the hand brake and ignition key should be withdrawn.
13. Refuel without engine should stop and should not be closed while work harvester.
14. Highway is detachable tray, tray will be installed in the carrier should withdraw, because the table is large and heavy and will block traffic and downhill braking the front wheels on the combine harvester may handstand.
Harvester is ready for shipping in the first product we have to empty the store. Carrying case is also brought to the unloading elavatörü. Unit in the back and then cutting out car on agriculture to move in terms of traffic safety has benefits. Combine harvester, the tractor may topple as easily. Therefore be slow in rough terrain.
15. Should be used by the combine harvester drivers responsible, should not be allowed to use someone else's own driver.
16. Reaper in stoppage occurs, blocking, enforcement, etc.. In any case, the transmission automatically cut gripping action, and so must have distinctive layouts.
17. Movement for transmission flat belts, V belts and chains must be controlled tension in her work out.
18. Discharging system is running the grain combine harvester to the grain store for any reason should not be entered.
19. Setup, repair, maintenance and cleaning should be disconnected during the transmission action, if necessary harvester engine must be completely stopped.
20. Combine harvester engine, the radiator, exhaust pipe, muffler, etc.. units accumulated dust, stalks, straw-like deposits on the break should be cleaned every job.
21. The fuel and oil spills on the combine harvester engine should be cleaned immediately.
22. Do not refuel while engine hot.
23. Muffler and exhaust connections for possible fire at least once a day should be checked.
24. To reduce fire hazard, is running hard as the machine next to water and fire extinguishing equipment should be.
One driver in place on the combine harvester, and the other to paddle box on the right side of the back of two fire extinguishing devices at least 15 kg, a digging shovel, and 10 - 15 m2 must be duck.
25. Electrical equipment should be checked on a regular basis, reaper, the cable insulation is damaged and must be repaired or must be replaced.
26. One driver in place on the combine harvester, and the other to paddle box on the right side of the back of at least two 15Kg 'hood fire extinguishing device, a mattock, shovel, and 10 - 15 m2 must be duck.
27. Combine harvester is working in the fields, as a precaution against fire burning soil of a tractor and plow to isolate the process should be ready.
28. In an open area between the hangar or other agricultural tools and machines with the combine harvester in a fire in the park should be removed quickly.
29. Law and related traffic on highways harvester seyrederken should act in line with regulations.
30. To appear in the order to provide navigational; turn, brake and park lights that make night vision of the far right must be strong and be in operation.
31. Convert, braking and parking lamps with an outlet to connect to the carrier table, table lamps carrier must be in the running.
Soil Processing Tools - Machines in the Use of Safety Rules
The use of processing equipment and machinery in the soil next to the general safety rules to follow other safety rules, such as the following can sort
1. Processing tools and machines to work with the soil before you start with the people should be warned.
2. Soil processing machinery and should not be trying to turn sharply.
3. Plow, KÜLTÝVATÖR, disc harrow, etc.. processing machinery in motion, while the captured territory mechanism or instrument, should not be superimposed on the machine, tools and should not be entered into between the tractor, the setting, maintenance and lubrication should not be done.
4. Processing tools and machines are taken soil type and the settings taken arms reading to endanger the driver is too long or too short not to.
5. Automatic removal order and the plow is pulled similar tools and machines used in agriculture to control the use of ropes must be appropriate tension.
6. Processing tools and machinery for soil types are taken, the tractor driver by running the left should not connect to the tractor. Facilities should be able to measure this purpose. Appropriate to assist staff at a height of iron taken of the tractor or a support must be made by using connect.
7. Cover or protection of the milling of the soil falling like tears for reasons to throw stones against the possibility of the movement of milling should be approached with the chops.
8. Single-axle tractor with a run in return for land in milling milling feet must be careful not to hit driver and stop the movement of milling should be back in action.
9. Soil cover in addition to milling hair-pin in the protective security scheme should include.
10. Processing tools and machinery into the soil, or work out before work on security, especially the parts should be checked.
Special Safety Rules Related to October Machines
October machines and road work at the speed of the driver handbook, the action should be run, and other protective housing layouts should be checked
1. Need to withdraw, and is actually connected to the type of tractors and sowing machines must be taken to safety.
2. Seed and fertilizer should be made to fill the job in the fields.
3. Highway traffic signs needed to be attached.
4. Field and growth in the fields during sowing and planting machines sit on helping individuals and seed not moved. Before sowing in the fields, according to the state of the field will be back in place before the beginning of the tractor should not be included.
5. Absolutely must be removed in October machines turn suspended type.
6. And planter seed tube feet often, and congestion that is often raised for control must be resolved.
7. Seed and fertilizer box frequently, often to be checked before filling should be completely discharged.
8. While in the fields planting and sowing machines suspended, remove the tractor hydraulic lever "in swimmer" must be, in the removal process and should not be done at low speed.
9. With sowing machines in the field below Askılı going to be stress spreader arms, sowing machine is fully removed, should be brought to the state of transportation safety lock. During October in the fields next to the rack arm 2 - 4 cm should be given space.
10. Machine in October with more than going to the field should not be going fast and slow, especially suspended machines to bend and kasis be entered.
11. Machine status and size of the field during October according to the 8 - 10 km / h should be used quickly.
12. Going to type in the fields sowing machines suspended hydraulic front arm position selection control 'should be locked and transportation should be used.
13. Move the bottleneck machines in the sowing and planting machines should not be corrected manually while back in October should not be the right move.
14. October machines during filling of the grain and fertilizer warehouse person to work comfortably for the necessary precautions must be taken.
15. October machines fill the tank before connecting to the tractor and tractor after discharge from the tank must be solved.
16. Should not be near to the Officer of sowing machines.
17. Machines to work in October on the passenger seat of the board or must be followed and should not be entered in the tractor with the machine.
18. Bare feet of the machine axes and discs in October should not be cleaned manually. Cleaning should be used during ayıracılar appropriate.
19. Moving parts and check for other security schemes should break each job.
20. October machine settings, cleaning and maintenance work should be done after the tractor has been stopped completely.
Safety Rules for Harvesting Machinery and Harman
Harvesting and threshing machines in use outside of the general security measures following the safety rules in the following items must comply with
1. Moving parts before harvesting machine oil should work, fittings and safety schemes and other parts should be checked and the closest anyone has been on the move should not have.
2. Harvesting machines and drivers handbook should make the move at the speed of cutting, setting, maintenance and cleaning during the scheme appraisal and always should be on the back of the machine and tractor should not be running.
3. The driver is pulled by tractor while trying to tip the harvest machinery and its own walk with harvesting machines to stop working without engine displacement must not leave.
4. In fact, road conditions, while the hydraulic lock on the type of machinery to harvest, the machine must be prepared according to road conditions should be attached, and thumb safety enclosure.
5. Harvesting machines, cutting barriers in the case of a scheme to avoid damage on the machine should automatically remove the safety must be set in order, the appropriate measure.
6. Meadow mower, sickle machine, cutting the ties, such as corn harvesting machine. occur in the appraisal of machinery and equipment should not be obstructive hand cleaning.
7. Threshing machines and a fixed location, such as grass cutting machine is running on the machine to run around with the machine should not be allowed to move people who are not officers.
8. Around these machines to the appropriate safety distance away surrounded by ropes, and also against the possibility harvester tractor fire in the iron and steel taken should be connected with a rope.
9. Threshing machines separated from the power supply to move the drum to adjust the tension should not be nonstop, and not attached belt. Protection must be provided on pulleys.
10. Worked as hard in the water near the threshing machine and fire extinguishing equipment must be available, should be extended nose and tail on the spring (automatic closing) must have a cover.
11. Harvesting and threshing machines have been prepared according to road conditions must be off.
12. The machines work by taking action in the queue mile road conditions should be attached to the tail shaft.
13. Rotary mower blade fescue danger is trying to throw stones at the front or back should not be.
14. Green fodder chopping machines blade protection cover while trying to blow the lid open and it should not, the settings and do not care and feeding of these machines on order, and similar teams, and hazardous substances should not be feeding scheme, stops automatically.
15. While working on their own not to return to the knife blade flat.
16. Safety and should be checked before starting work linking schemes.
17. Threshing machine and not in self-feeding scheme beating deviation above must supply chamber as batörden.
Balya Machine Safety Measures
During the use of machine safety rules Balya In addition to general safety rules are necessary to comply
1. Balya machine in working with large, untidy and loose clothing should not be used.
2. be resolved before starting to exercise and loose parts that must be checked whether.
3. Balya settings on the machine, repair, maintenance and search operations such as failure to stop the tractor to be, must be ignition key.
4. Hinged on the shaft enclosure protection surely must have inserted.
5. Balya machine when the road is hard to remove the bale cradle connects to high. Machines for moving the path to the state were brought to safety with the spring pin is received, pick - up spring rake to cover for their safety.
6. Before leaving the side of the tractor engine to stall, the ignition key and you need to pull out the hand brake on the tractor and bale skid your machine.
7. Connecting to the needle and thread a needle while working on the layout of the mooring arrangement of the safety cover.
8. Round bales, and shuts down the machine opens the back cover, cover the lack of anyone in the area of action must be provided.
9. Round bales machine lid is opened bales, must be attached to support the safety of cover.
10. Round bales with machine before starting any installation work created in the system of hydraulic oil pressure should be lowered.
11. Round bales machines work after the shock zero bar pressure on the back cover to be reduced.
12. Captured while trying to read the machine, etc. round bales. should be printed out on pieces.
13. Round bales machine trying to find the tractor driver must not be allowed near a second person.
14. Round bale to bale machines in the land is sloping, standing behind the shock machine wheels should be blocked by putting wedges.
15. Balya machines should not intervene in the grass collection arrangements during the work.
16. Balya machine safety rules will be to work with the operators must be trained.
17. Balya machines running the next machine, or deviation from the hanging herbs should not hand drawn, should not intervene in the mooring system, rope and tail of the break in the machine should be made after motion stops.
18. Return of the queue with the bale machines should be disconnected.
19. Balya machine with sufficient lighting for night work to be made.
Safety Rules Related to Hydraulic Control Front Loaders
Must be taken when using hydraulic controlled front loaders are the safety rules
1. Front end loaders and controlled studies of the hydraulic shovel work on the ground in should be kept in suspense.
2. Soft and slippery ground should work with the front loaders, scoop full and above should not be done when a sudden turn and hard braking.
3. During loading and unloading the necessary security measures should be taken around.
4. Since been removed by the skimmer and prone land should not be working correctly.
Agriculture Carts (Trailer) The Points to be aware of when and Safety Rules
A big part of agriculture in our country in the accident with the car to agriculture. Therefore, agriculture must be taken when using the car in two parts review the safety rules
A - be aware of when using the Points Trailer
1. Ok when not plugged into the tractor trailers captured, not things that must be kept moving.
2. Check reading on an adequate thickness (30 mm) with a pin attached to the tractor and secure with spring pins should be locked.
3. Plug before highway tractor trailer attached to the outlet is working and not be controlled.
4. More tractor trailers to be above the plain, or very little should be connected.
5. Tractor trailers with attached feet gas highway exits from a security perspective should not be used.
6. Road traffic law is specified in the reflector, wedges, etc.. equipment must be on trailers.
7. When viewing by other drivers of highway trailers to see the stop lamps for lighting equipment, cat eyes, etc..) Should be always in clean condition.
8. Set out by the tractor trailer brake control must be gently brake.
9. Braking in the flat beds and place enough oil to fat arrow should be taken.
10. After you have plugged into the tractor trailers are empty and the trailer hand brake control is not.
11. And when converted back to read the text of the trailer tires should be careful not to hit.
12. Turnover in the circular spring is easier dümenleme regular trailers. For this reason, must be careful when entering a corner.
13. No one captured on the bin should not be read, the box edges should not be anyone sitting. Passengers or workers living in trailers should be sure to move the time.
14. Installation of the chain before lifting the lid must be attached.
15. Written on the value of the tonnage overload trailers should not be installed. Overload and reduces the braking effect dümenlemeyi infects.
16. Trailers and loading on the border post on the maximum speed should not be used for.
17. Cargo loads must be good and solid, and edge than the width of the trailer must not overflow. If the rear and side of the overflow flag and reflectors marking should be installed.
18. Trailer with an axle, the maximum load weight of the arrow will not get in the way must be installed and the front of the tractor weight should be attached absolute.
19. Trailer with an axle, the load should not be installed in the back too. Read more by removing the rear tractor loaded because of the ease back in albino cause reduced braking efficiency.
20. Tractor skid when the rear hitch hydraulic lift should be installed.
21. In a break from a control trailer general (Tire air and failures, loose nuts, read the safety pin taken, traffic lights, etc.).
22. Be careful when taking a heavy load to be captured in business only to be captured using a hook. If you do not order a suitable attaching hydraulic lifter using secondary strap and pull the lever action taken should not be trying to do. Otherwise you may cause to rear.
23. Is controlled through a general break in the trailers.
24. Trailers before loading to cover, stretching the chain should be attached.
25. Written on the value of the tonnage overload trailers should not be installed. Plant reduces the braking Fazlayük, dümenlemeyi infects.
B - Security Rules
1. Trailers should not be standing by when.
2. Been removed under the trailer tipping trailers should not be entered without truss.
3. When plugged into the tractor trailers, tractor trailers should be up to. It should not be up to the tractor trailers.
4. When inserting and bias in slope trailers, trailer brakes and tires should be put in front wedges.
5. Before the tractor hit the road back, moving back to the trailer brakes should be checked.
6. Giderken forward, go back to open the lock should be noted.
7. Driving force in the downhill when trailers are never out of mind should not be any time.
8. When moving heavy loads by tractor down the link to the wolf's mouth in front of the tractor was lifted in the air, the danger of albino should be eliminated.
Tractor accidents are related to the most extreme speed. You do your speed work, moving to the land conditions, the equipment used is appropriate to set the number, do not forget you need to slow down in turn.
Elevator Safety Measures Related to
In general, the following safety rules on the use elevator to the need to comply
1. Larger than the material will be moved to the elevator entrance of foreign materials for the wire netting to prevent the entry should be inserted.
2. In case of failure to resolve the obstructive action of the elevator should be completely stopped.
3. Automatically stop overheating in elevatörün movement must have a safety order.
Fertilizer Distributor of Safety Rules
Fertilizer distributors to be using the following safety rules
1. Some kinds of fertilizer is harmful to human health. Hence the protective mask is worn, and the wind direction must be considered.
2. Be very careful to use the book to be read and the information should be followed.
3. Queues and chains should not be run without any protection.
4. Failure or any reason to stop with the queue should be stopped immediately.
5. Support the front wheels should be limited aksa bin loads
Sap Security Measures on strike Harman Machine
Threshing machines, the deviation must be taken to beat the safety rules, such as the following can sort
1. The study should be checked before starting the tightness of nuts.
2. Necessarily have the cover off the pulley and belt should be protected.
3. Before returning to the machine without moving parts should not have anything on the inside and batör.
4. During the study should not be working with clothing and plenty more to the machine should not be approached.
5. If you need to make a setting machine must be stopped. Studies need to be adjusted during the rotating parts must be cautious.
6. Take action to handle the machine trailers, trucks or machinery on the go, not necessarily where it should be.
7. The deviation of the machine's rotating parts disposed to cover the front of the spread should be around.
8. In working with queues and hinged to the shaft, the belt pulleys on the study should not be put any item.
9. Against static electricity while trying to land with tractors must be a chain or wire.
Safety Rules in sugarbeet harvest machine
Beet harvesting machines at high speed rotating parts, because of many studies requires special attention from the security angle
1. Withdrawal of protections available in the shaft of the machine to be sure.
2. The machine stopped working should not be resolved without congestion.
3. Biden with a lot more people in work units without warning with the horn not working and should be careful not to grasp.
4. During unloading at the bottom of the tank should try not to.
Safety Rules in sickle Wing Machine
When using the machine to be sickle Kanatlı safety rules are
1. Machine lubrication should not be trying, and definitely set.
2. During the opening of the folding table and must be careful and use protection when inserted knife should.
3. Working in the field during the motion of the wing does not have anyone's attention should be paid.
4. Protection and safety chains with queues surely must be inserted.
War Machine in the Use of Agricultural Safety Rules
Agricultural tools and machinery used in fighting drugs in three ways to enter the human body (through the mouth, through skin and respiratory). Poisoning happens in two ways; acute toxicity (Poison sudden) and chronic toxicity (slowly, slowly over time) were in the form of the poison.
LD50 = oral or skin is applied to animal experiments by 50% of their URL each of kills and body weight (kg) for the (mg) is specified as a dose.
For effective drugs via inhalation LC50 = is used. 4-hour period of breathing 50% of the experimental animals' lethal dose of the API, (m3) in air (mg) is expressed as.
The war machine when using agricultural special attention to safety is needed. For this purpose, most developed countries of agricultural medication storage, field implementation of pharmaceutical waste is not required to comply with many regulations and laws have provisions (For this purpose, the general outline of security measures are given below.
1. LD50 and LC50 statements described above in the field of application of plant protection drugs how much smaller the LD50 value, the more poisonous and dangerous drugs. Accordingly, the person who applied to the fields of medicine must receive the necessary security measures.
2. Drug labels should be read always.
3. Any malfunction before beginning to apply whether the equipment (fugitive drug, etc..) Should be checked.
4. Instruments or to pollute the environment, damage (of dishes) should be avoided.
5. Not to leave the body's skin to wear protective clothing, rubber gloves, boots and a visor, or if necessary to protect your face mask should be used.
6. Just be prepared as needed ilaçlı fluid, multiple medications at the same time opening the box or tin can.
7. Moved from the loss of drugs and medicines should be cautious in the windy weather ..
8. Anything during medication should not be eaten, (smoking, etc..) Should be inside.
9. Drug and device side should not be abandoned any time.
10. Medications must be cleaned with soapy water after section (to be washed), and the clothes should be changed, medications used during the good clothes should be washed at.
11. To eliminate free drug boxes are a lot of ways. When applying these methods to the legal regulations must be adhered to at all.
12. Spray with fresh water after the tools and equipment should be cleaned thoroughly.
13. Its original box in a box other than the medication should not be moved. (Food, drink boxes, etc.).
14. Medication with food or animal feed must be kept away from children Do not store.
15. Any reason to enter the field İlaçlı if necessary, at least 24 hours expected. You need to wait a long time early in the field should be always alert articles.
16. Between drugs that are required to harvest the last of waiting time should be followed strictly.
17. Directly from a water atomiser used auto-filling mechanism that can cause water to escape drugs.
18. To measure the amount of medication to give a rough captain and at the end rather than closed systems should be transferred immediately to clean them is required.
19. The medicine to fill the tank up to shoulder height should not be trying to remove. Filling height is appropriate and should be carefully pressed into place.
20. Although not yet in our country, many new atomiser to fill in the knee level layouts are available. This type of atomiser from a security perspective should be preferred. Drug slowly, slowly be filled.
21. If the two drugs, if applied together, each individual is mixed, must be added to separate the water and should be followed to the proposed order.
Safety Rules for Green Fodder Harvesting Machine
Using green fodder harvesting machines have to comply with the following safety rules
1. Drum mower meadow during the format of the machine to be attached protective canvas. (Tambur discs at very high rpm on the back of the drum blade perpendicular to any item turn throwing).
2. Appliances trying absolutely set, clearing blockages and so the herbs. work should not be done. Queue is used to this type of work should be absolutely stopped.
3. Mower in tip-toed in some cases moving meadow stop knives Even if the dead point of the knife lama and other states move concussion may cause the accident.
4. Protective system when not in use, cutting the hair must always be inserted.
5. Drum mower with meadow around and especially on the back while trying to not have anyone's attention should be paid.
6. Mower safety mechanism is located in the meadow. Various obstacles (stones, roots, etc.). or excessive loading of the machine back to the resistance caused by the shearing system prevents damage of the machine to be brought back to the old position, the right go back.
7. Field growth - in developing tools for safety locks - hair pin and must surely be connected.
Deviations in the dangerous area Machine Parts
In the event of a hindrance Biçme order to avoid damage, the safety of the machines must be set in order, the appropriate measure. This type of stone working machines, etc., are in danger while trying to throw the item to be approached.
Silage Machines in Use of Security Rules
Silage should be taken during use of machine safety rules are
1. First-run and control of the machine should not be done in a closed place, should be aware of harmful gases.
2. Relaxation time, even when separated from the tractor engine to stall.
3. While working on the machine, the tractor must always stop.
4. Knives must be very carefully is even.
5. Broken knife, twisted wings, etc.. deformed parts should be replaced immediately, the machine should be made comfortable new setting does not work. Experts should equalize.
6. Comfortable hinged miles to go, depending on the need to protect, identify the chain must be identified.
7. Feet should be used when absolutely support separate machine.
8. On the way, carrying on the protective plates inserted into the cheek should be referred.
9. Tractor to, corn silage machine is connected with the tractor trailer carrying the front axle to reduce the burden should not be allowed. The use of a double axle trailer that is suitable for agriculture.
10. Material in the settings and fix the pipe to be shipped from a remote command to be sure.
Making and Using Herbs in the Barrel Distributing Machine Safety Rules
Making and using herbs to get the machine gun barrel to deploy the required security rules are
1. Streets and roads open to traffic on the way to use time machine to be brought to the state, required lighting lamps and red - white sign plates should be installed.
2. Be careful driving, especially long and heavy type machines are taken should be considered in a front axle load. Thus, instruments must be careful against the upset.
3. Queues and in no time returning the other mile muhafazasız should not be running.
4. Employees or maintenance of the machine settings should be always made after the stop.
5. Failure to intervene should not be trying any time machine, and in this case should not be closer to the machine.
Harvesting and threshing machines in use outside of the general security measures following the safety rules in the following items must comply with
1. Moving parts before harvesting machine oil should work, fittings and safety schemes and other parts should be checked and the closest anyone has been on the move should not have.
2. Harvesting machines and drivers handbook should make the move at the speed of cutting, setting, maintenance and cleaning during the scheme appraisal and always should be on the back of the machine and tractor should not be running.
3. The driver is pulled by tractor while trying to tip the harvest machinery and its own walk with harvesting machines to stop working without engine displacement must not leave.
4. In fact, road conditions, while the hydraulic lock on the type of machinery to harvest, the machine must be prepared according to road conditions should be attached, and thumb safety enclosure.
5. Harvesting machines, cutting barriers in the case of a scheme to avoid damage on the machine should automatically remove the safety must be set in order, the appropriate measure.
6. Meadow mower, sickle machine, cutting the ties, such as corn harvesting machine. occur in the appraisal of machinery and equipment should not be obstructive hand cleaning.
7. Threshing machines and a fixed location, such as grass cutting machine is running on the machine to run around with the machine should not be allowed to move people who are not officers.
8. Around these machines to the appropriate safety distance away surrounded by ropes, and also against the possibility harvester tractor fire in the iron and steel taken should be connected with a rope.
9. Threshing machines separated from the power supply to move the drum to adjust the tension should not be nonstop, and not attached belt. Protection must be provided on pulleys.
10. Worked as hard in the water near the threshing machine and fire extinguishing equipment must be available, should be extended nose and tail on the spring (automatic closing) must have a cover.
11. Harvesting and threshing machines have been prepared according to road conditions must be off.
12. The machines work by taking action in the queue mile road conditions should be attached to the tail shaft.
13. Rotary mower blade fescue danger is trying to throw stones at the front or back should not be.
14. Green fodder chopping machines blade protection cover while trying to blow the lid open and it should not, the settings and do not care and feeding of these machines on order, and similar teams, and hazardous substances should not be feeding scheme, stops automatically.
15. While working on their own not to return to the knife blade flat.
16. Safety and should be checked before starting work linking schemes.
17. Threshing machine and not in self-feeding scheme beating deviation above must supply chamber as batörden.
Balya Machine Safety Measures
During the use of machine safety rules Balya In addition to general safety rules are necessary to comply
1. Balya machine in working with large, untidy and loose clothing should not be used.
2. be resolved before starting to exercise and loose parts that must be checked whether.
3. Balya settings on the machine, repair, maintenance and search operations such as failure to stop the tractor to be, must be ignition key.
4. Hinged on the shaft enclosure protection surely must have inserted.
5. Balya machine when the road is hard to remove the bale cradle connects to high. Machines for moving the path to the state were brought to safety with the spring pin is received, pick - up spring rake to cover for their safety.
6. Before leaving the side of the tractor engine to stall, the ignition key and you need to pull out the hand brake on the tractor and bale skid your machine.
7. Connecting to the needle and thread a needle while working on the layout of the mooring arrangement of the safety cover.
8. Round bales, and shuts down the machine opens the back cover, cover the lack of anyone in the area of action must be provided.
9. Round bales machine lid is opened bales, must be attached to support the safety of cover.
10. Round bales with machine before starting any installation work created in the system of hydraulic oil pressure should be lowered.
11. Round bales machines work after the shock zero bar pressure on the back cover to be reduced.
12. Captured while trying to read the machine, etc. round bales. should be printed out on pieces.
13. Round bales machine trying to find the tractor driver must not be allowed near a second person.
14. Round bale to bale machines in the land is sloping, standing behind the shock machine wheels should be blocked by putting wedges.
15. Balya machines should not intervene in the grass collection arrangements during the work.
16. Balya machine safety rules will be to work with the operators must be trained.
17. Balya machines running the next machine, or deviation from the hanging herbs should not hand drawn, should not intervene in the mooring system, rope and tail of the break in the machine should be made after motion stops.
18. Return of the queue with the bale machines should be disconnected.
19. Balya machine with sufficient lighting for night work to be made.
Safety Rules Related to Hydraulic Control Front Loaders
Must be taken when using hydraulic controlled front loaders are the safety rules
1. Front end loaders and controlled studies of the hydraulic shovel work on the ground in should be kept in suspense.
2. Soft and slippery ground should work with the front loaders, scoop full and above should not be done when a sudden turn and hard braking.
3. During loading and unloading the necessary security measures should be taken around.
4. Since been removed by the skimmer and prone land should not be working correctly.
Agriculture Carts (Trailer) The Points to be aware of when and Safety Rules
A big part of agriculture in our country in the accident with the car to agriculture. Therefore, agriculture must be taken when using the car in two parts review the safety rules
A - be aware of when using the Points Trailer
1. Ok when not plugged into the tractor trailers captured, not things that must be kept moving.
2. Check reading on an adequate thickness (30 mm) with a pin attached to the tractor and secure with spring pins should be locked.
3. Plug before highway tractor trailer attached to the outlet is working and not be controlled.
4. More tractor trailers to be above the plain, or very little should be connected.
5. Tractor trailers with attached feet gas highway exits from a security perspective should not be used.
6. Road traffic law is specified in the reflector, wedges, etc.. equipment must be on trailers.
7. When viewing by other drivers of highway trailers to see the stop lamps for lighting equipment, cat eyes, etc..) Should be always in clean condition.
8. Set out by the tractor trailer brake control must be gently brake.
9. Braking in the flat beds and place enough oil to fat arrow should be taken.
10. After you have plugged into the tractor trailers are empty and the trailer hand brake control is not.
11. And when converted back to read the text of the trailer tires should be careful not to hit.
12. Turnover in the circular spring is easier dümenleme regular trailers. For this reason, must be careful when entering a corner.
13. No one captured on the bin should not be read, the box edges should not be anyone sitting. Passengers or workers living in trailers should be sure to move the time.
14. Installation of the chain before lifting the lid must be attached.
15. Written on the value of the tonnage overload trailers should not be installed. Overload and reduces the braking effect dümenlemeyi infects.
16. Trailers and loading on the border post on the maximum speed should not be used for.
17. Cargo loads must be good and solid, and edge than the width of the trailer must not overflow. If the rear and side of the overflow flag and reflectors marking should be installed.
18. Trailer with an axle, the maximum load weight of the arrow will not get in the way must be installed and the front of the tractor weight should be attached absolute.
19. Trailer with an axle, the load should not be installed in the back too. Read more by removing the rear tractor loaded because of the ease back in albino cause reduced braking efficiency.
20. Tractor skid when the rear hitch hydraulic lift should be installed.
21. In a break from a control trailer general (Tire air and failures, loose nuts, read the safety pin taken, traffic lights, etc.).
22. Be careful when taking a heavy load to be captured in business only to be captured using a hook. If you do not order a suitable attaching hydraulic lifter using secondary strap and pull the lever action taken should not be trying to do. Otherwise you may cause to rear.
23. Is controlled through a general break in the trailers.
24. Trailers before loading to cover, stretching the chain should be attached.
25. Written on the value of the tonnage overload trailers should not be installed. Plant reduces the braking Fazlayük, dümenlemeyi infects.
B - Security Rules
1. Trailers should not be standing by when.
2. Been removed under the trailer tipping trailers should not be entered without truss.
3. When plugged into the tractor trailers, tractor trailers should be up to. It should not be up to the tractor trailers.
4. When inserting and bias in slope trailers, trailer brakes and tires should be put in front wedges.
5. Before the tractor hit the road back, moving back to the trailer brakes should be checked.
6. Giderken forward, go back to open the lock should be noted.
7. Driving force in the downhill when trailers are never out of mind should not be any time.
8. When moving heavy loads by tractor down the link to the wolf's mouth in front of the tractor was lifted in the air, the danger of albino should be eliminated.
Tractor accidents are related to the most extreme speed. You do your speed work, moving to the land conditions, the equipment used is appropriate to set the number, do not forget you need to slow down in turn.
Elevator Safety Measures Related to
In general, the following safety rules on the use elevator to the need to comply
1. Larger than the material will be moved to the elevator entrance of foreign materials for the wire netting to prevent the entry should be inserted.
2. In case of failure to resolve the obstructive action of the elevator should be completely stopped.
3. Automatically stop overheating in elevatörün movement must have a safety order.
Fertilizer Distributor of Safety Rules
Fertilizer distributors to be using the following safety rules
1. Some kinds of fertilizer is harmful to human health. Hence the protective mask is worn, and the wind direction must be considered.
2. Be very careful to use the book to be read and the information should be followed.
3. Queues and chains should not be run without any protection.
4. Failure or any reason to stop with the queue should be stopped immediately.
5. Support the front wheels should be limited aksa bin loads
Sap Security Measures on strike Harman Machine
Threshing machines, the deviation must be taken to beat the safety rules, such as the following can sort
1. The study should be checked before starting the tightness of nuts.
2. Necessarily have the cover off the pulley and belt should be protected.
3. Before returning to the machine without moving parts should not have anything on the inside and batör.
4. During the study should not be working with clothing and plenty more to the machine should not be approached.
5. If you need to make a setting machine must be stopped. Studies need to be adjusted during the rotating parts must be cautious.
6. Take action to handle the machine trailers, trucks or machinery on the go, not necessarily where it should be.
7. The deviation of the machine's rotating parts disposed to cover the front of the spread should be around.
8. In working with queues and hinged to the shaft, the belt pulleys on the study should not be put any item.
9. Against static electricity while trying to land with tractors must be a chain or wire.
Safety Rules in sugarbeet harvest machine
Beet harvesting machines at high speed rotating parts, because of many studies requires special attention from the security angle
1. Withdrawal of protections available in the shaft of the machine to be sure.
2. The machine stopped working should not be resolved without congestion.
3. Biden with a lot more people in work units without warning with the horn not working and should be careful not to grasp.
4. During unloading at the bottom of the tank should try not to.
Safety Rules in sickle Wing Machine
When using the machine to be sickle Kanatlı safety rules are
1. Machine lubrication should not be trying, and definitely set.
2. During the opening of the folding table and must be careful and use protection when inserted knife should.
3. Working in the field during the motion of the wing does not have anyone's attention should be paid.
4. Protection and safety chains with queues surely must be inserted.
War Machine in the Use of Agricultural Safety Rules
Agricultural tools and machinery used in fighting drugs in three ways to enter the human body (through the mouth, through skin and respiratory). Poisoning happens in two ways; acute toxicity (Poison sudden) and chronic toxicity (slowly, slowly over time) were in the form of the poison.
LD50 = oral or skin is applied to animal experiments by 50% of their URL each of kills and body weight (kg) for the (mg) is specified as a dose.
For effective drugs via inhalation LC50 = is used. 4-hour period of breathing 50% of the experimental animals' lethal dose of the API, (m3) in air (mg) is expressed as.
The war machine when using agricultural special attention to safety is needed. For this purpose, most developed countries of agricultural medication storage, field implementation of pharmaceutical waste is not required to comply with many regulations and laws have provisions (For this purpose, the general outline of security measures are given below.
1. LD50 and LC50 statements described above in the field of application of plant protection drugs how much smaller the LD50 value, the more poisonous and dangerous drugs. Accordingly, the person who applied to the fields of medicine must receive the necessary security measures.
2. Drug labels should be read always.
3. Any malfunction before beginning to apply whether the equipment (fugitive drug, etc..) Should be checked.
4. Instruments or to pollute the environment, damage (of dishes) should be avoided.
5. Not to leave the body's skin to wear protective clothing, rubber gloves, boots and a visor, or if necessary to protect your face mask should be used.
6. Just be prepared as needed ilaçlı fluid, multiple medications at the same time opening the box or tin can.
7. Moved from the loss of drugs and medicines should be cautious in the windy weather ..
8. Anything during medication should not be eaten, (smoking, etc..) Should be inside.
9. Drug and device side should not be abandoned any time.
10. Medications must be cleaned with soapy water after section (to be washed), and the clothes should be changed, medications used during the good clothes should be washed at.
11. To eliminate free drug boxes are a lot of ways. When applying these methods to the legal regulations must be adhered to at all.
12. Spray with fresh water after the tools and equipment should be cleaned thoroughly.
13. Its original box in a box other than the medication should not be moved. (Food, drink boxes, etc.).
14. Medication with food or animal feed must be kept away from children Do not store.
15. Any reason to enter the field İlaçlı if necessary, at least 24 hours expected. You need to wait a long time early in the field should be always alert articles.
16. Between drugs that are required to harvest the last of waiting time should be followed strictly.
17. Directly from a water atomiser used auto-filling mechanism that can cause water to escape drugs.
18. To measure the amount of medication to give a rough captain and at the end rather than closed systems should be transferred immediately to clean them is required.
19. The medicine to fill the tank up to shoulder height should not be trying to remove. Filling height is appropriate and should be carefully pressed into place.
20. Although not yet in our country, many new atomiser to fill in the knee level layouts are available. This type of atomiser from a security perspective should be preferred. Drug slowly, slowly be filled.
21. If the two drugs, if applied together, each individual is mixed, must be added to separate the water and should be followed to the proposed order.
Safety Rules for Green Fodder Harvesting Machine
Using green fodder harvesting machines have to comply with the following safety rules
1. Drum mower meadow during the format of the machine to be attached protective canvas. (Tambur discs at very high rpm on the back of the drum blade perpendicular to any item turn throwing).
2. Appliances trying absolutely set, clearing blockages and so the herbs. work should not be done. Queue is used to this type of work should be absolutely stopped.
3. Mower in tip-toed in some cases moving meadow stop knives Even if the dead point of the knife lama and other states move concussion may cause the accident.
4. Protective system when not in use, cutting the hair must always be inserted.
5. Drum mower with meadow around and especially on the back while trying to not have anyone's attention should be paid.
6. Mower safety mechanism is located in the meadow. Various obstacles (stones, roots, etc.). or excessive loading of the machine back to the resistance caused by the shearing system prevents damage of the machine to be brought back to the old position, the right go back.
7. Field growth - in developing tools for safety locks - hair pin and must surely be connected.
Deviations in the dangerous area Machine Parts
In the event of a hindrance Biçme order to avoid damage, the safety of the machines must be set in order, the appropriate measure. This type of stone working machines, etc., are in danger while trying to throw the item to be approached.
Silage Machines in Use of Security Rules
Silage should be taken during use of machine safety rules are
1. First-run and control of the machine should not be done in a closed place, should be aware of harmful gases.
2. Relaxation time, even when separated from the tractor engine to stall.
3. While working on the machine, the tractor must always stop.
4. Knives must be very carefully is even.
5. Broken knife, twisted wings, etc.. deformed parts should be replaced immediately, the machine should be made comfortable new setting does not work. Experts should equalize.
6. Comfortable hinged miles to go, depending on the need to protect, identify the chain must be identified.
7. Feet should be used when absolutely support separate machine.
8. On the way, carrying on the protective plates inserted into the cheek should be referred.
9. Tractor to, corn silage machine is connected with the tractor trailer carrying the front axle to reduce the burden should not be allowed. The use of a double axle trailer that is suitable for agriculture.
10. Material in the settings and fix the pipe to be shipped from a remote command to be sure.
Making and Using Herbs in the Barrel Distributing Machine Safety Rules
Making and using herbs to get the machine gun barrel to deploy the required security rules are
1. Streets and roads open to traffic on the way to use time machine to be brought to the state, required lighting lamps and red - white sign plates should be installed.
2. Be careful driving, especially long and heavy type machines are taken should be considered in a front axle load. Thus, instruments must be careful against the upset.
3. Queues and in no time returning the other mile muhafazasız should not be running.
4. Employees or maintenance of the machine settings should be always made after the stop.
5. Failure to intervene should not be trying any time machine, and in this case should not be closer to the machine.
